Care & Maintenance

Your waterhousing is a fine piece of equipment and it needs to be maintained and taken care of in order for it to offer you years of service.

The most important thing you can do is to wash the waterhousing with copious amounts of fresh water after each use.

Towel dry and disassemble the waterhousing in a clean environment, free of blowing sand.

The inside of the waterhousing does not need to be rinsed. Wiping it with a clean, dry or slightly damp soft cotton cloth is sufficient. (Microfiber cloths can also be used.)

Do not use any type of solvents or harsh detergents as this may cause damage to the Plexiglas windows. Dishwashing soap and a soft cloth can be used on the exterior of the waterhousing.

Denatured Alcohol or Methylated Spirits can be used to remove stubborn stains and this is the only solvent we recommend as it will not harm the Plexiglas.

Keep the control shafts well lubricated with Essex silicone grease.

Use a dedicated hard case to transport your waterhousing.

Do not leave your waterhousing in a hot location such as a locked car on a very hot day as temperatures can easily soar to the heat deflection point of the polyurethane shell.

Never store your housing for an extended period of time with the latches in the closed and locked position.

Your Cart

Online purchasing has been disabled.